How To Clean Dyson Vacuum Cleaner V10

How to clean Dyson vacuum cleaner V10—it sounds simple enough, right? But if you’ve owned one for a while, you probably already know that keeping it clean isn’t just about emptying the dustbin now and then.

I’ve had my V10 for a couple of years, and trust me, when it starts losing suction or making weird noises, a deep clean makes all the difference.

These best vacuum cleaner brands vacuums are powerful, no doubt, but like anything with moving parts and filters, they get clogged up over time.

I used to think it would just keep working without much care, but I learned the hard way. Once, it stopped picking up properly, and I thought something was broken.

Turned out, the filter was just full of fine dust, and the roller had hair wrapped all over it.

So in this guide, I’m going to walk through exactly how I clean my Dyson V10 from top to bottom. It’s not complicated, but there are a few spots that people often forget, like the wand tube or the cyclone vents.

I’ll also share how often I clean each part based on my own use—especially since I have pets at home.

If your V10 has started acting up, don’t rush to buy a new one. A proper clean might be all it needs to run like it did on day one.

Why Regular Cleaning of Dyson Vacuum Cleaner V10 Matters

When I first bought my Dyson V10, I honestly didn’t think much about maintenance. I figured as long as I emptied the dustbin now and then, it would keep running fine. But after a few months,

I started noticing little changes—less suction, a strange smell, and the floorhead not spinning as smoothly. That’s when I realized how important it is to clean it properly and regularly.

Keeps the Suction Strong

The first thing I noticed when my vacuum wasn’t clean was the suction going weak. It wasn’t picking up dirt the way it used to.

If you’ve been wondering how to clean Dyson vacuum cleaner V10, chances are you’ve run into this too. Dust builds up inside the filter, clogs the airways, and before you know it, your powerful V10 feels like a basic vacuum.

more reads
how much is Dyson V6 vacuum cleaner
can you change the battery on a Dyson vacuum cleaner
best Dyson vacuum cleaner

Stops the Electric Motor from Getting Overworked

When the inside parts are dirty—especially around the filter and cyclone—your vacuum’s electric motor has to work harder to keep up.

I remember mine started making a slightly louder sound than usual, like it was straining. That’s not a good sign. A simple clean-up helped get it back to normal.

Helps with Air Quality

This one I didn’t think about at all until someone in the house with allergies started sneezing more than usual.

A dirty filter can’t trap dust and allergens the way it should, and all that stuff ends up back in the room. Regular cleaning fixed that too.

also reads
best SEBO vacuum cleaner for home
what are SEBO vacuums
are SEBO vacuums better than Dyson

Makes the Vacuum Glide Better

When hair wraps around the brush bar or the wheels get dusty, pushing the vacuum gets harder. I clean out the brush bar now every couple of weeks, and it moves way more smoothly. Honestly, it just feels better to use.

Protects Your Investment

These vacuums aren’t cheap. So learning how to clean Dyson vacuum cleaner V10 properly has helped me keep mine in top shape without spending on repairs or replacements. A little care goes a long way.

Which Parts Need Cleaning in Dyson Vacuum Cleaner V10?

When I first started using the Dyson V10, I didn’t really think much about cleaning it beyond just emptying the bin. But over time, I realized that wasn’t enough.

The vacuum started losing suction, and it didn’t feel as smooth to use. That’s when I decided to learn properly how to clean Dyson vacuum cleaner V10.

It turns out there are quite a few parts that collect hidden dust and dirt, and each one plays a role in keeping the vacuum running like new.

further reads
which SEBO vacuum is best for allergies
what is the best SEBO vacuum cleaner for carpets
best SEBO vacuum for pet hair

Dustbin (Clear Bin)

This is the part we all remember to empty—but what I didn’t realize is that fine dust sticks to the inside walls even after the dirt is thrown out. Every few weeks,

I remove the bin completely and wipe it down with a damp cloth. Sometimes I use a soft brush to reach the edges. It keeps things cleaner and avoids that dusty smell.

moreover reads
how long do SEBO vacuums last
are SEBO vacuum cleaners good
best SEBO vacuum cleaner

Filter

This part caught me by surprise. The filter sits right at the back of the vacuum, and it clogs up faster than you’d expect—especially if you use the vacuum often.

Washing it under cold water (no soap) makes a big difference. I make sure it’s fully dry (takes about a day) before putting it back.

Honestly, learning this step changed how I take care of my vacuum and helped me understand how to clean Dyson vacuum cleaner V10 the right way.

Brush Bar

Hair, especially long strands, wraps around the brush bar very quickly. I use scissors to cut through the hair, and then I pull it out by hand. When the brush is clean, the vacuum moves more smoothly, and it even picks up more dirt in one go.

don’t miss
how many different Henry vacuums are there
can robot vacuums replace regular vacuums

Extension Wand

You’d think this part stays clean, but it doesn’t. Dust settles inside the tube, slowly affecting the suction. Every now and then, I slide a microfiber cloth through it or gently tap it to get rid of the debris.

Cyclone Vents

These little vents are easy to miss. They’re around the top part of the vacuum, and they can collect a fine layer of dust that’s hard to see.

I take a dry paintbrush or an old toothbrush and gently brush away the buildup. It only takes a minute but really helps with airflow.

When I started paying attention to all these parts, I saw a big difference in how well my Dyson V10 worked. It felt more powerful, lighter to move, and the filter smell disappeared.

Regular cleaning really does make the vacuum feel like new again.

How Often Should You Clean Your Dyson Vacuum Cleaner V10?

When I first got my Dyson V10, I didn’t really think about how often it needed cleaning. I’d just use it, empty the bin when it was full, and that was it.

But over time, I noticed it wasn’t picking up as well, and that’s when I started to understand how important regular cleaning is.

Now, I follow a simple routine that helps keep my vacuum working properly without waiting for it to lose power. It really made me learn how to clean Dyson vacuum cleaner V10 the right way.

Empty the Bin – Every Time You Use It

This became a habit for me. After every use, I check the dustbin—even if it’s not completely full. Fine dust builds up quickly, and leaving it inside just makes the vacuum work harder than it should. Now,

I just hit the red lever, drop the dirt out, and wipe the inside if it looks dusty.

Clean the Brush Bar – Once a Week Works Best

Every week, I flip the vacuum and check the roller brush. Hair—especially long strands—always gets tangled around it.

I keep a small pair of scissors near the storage area and trim off anything that’s wrapped around. It’s a small job, but it really helps keep the motorhead spinning freely.

Wash the Filter – Once a Month Is Enough

I didn’t wash the filter at all in the beginning because I didn’t realize how much it mattered. But once I did, the suction came back strong. Now, I rinse it under cold water every month.

I don’t use soap or squeeze it—just rinse, tap it gently, and let it dry on the windowsill for 24 hours. Honestly, it’s one of the most important steps in how to clean Dyson vacuum cleaner V10 thoroughly.

Do a Full Check – Every 2–3 Months

Every couple of months, I take some time on a Sunday to check the whole vacuum. I clean the wand with a dry cloth,

look into the cyclone for any blockages, and brush out the air vents with a soft toothbrush. I even check inside the tools like the crevice and mini motorized attachments.

Following this routine has made my V10 last longer and perform better. It doesn’t feel like a chore anymore—it’s just part of how I take care of the stuff I rely on.

Common Mistakes to Avoid When You Clean Dyson Vacuum Cleaner V10

When I first started figuring out how to clean Dyson vacuum cleaner V10, I made some mistakes that I wish I’d known to avoid. Little things can actually cause big issues if you’re not careful. Here’s what I learned along the way.

Don’t Use Soap on the Filter

I thought using soap would get the filter extra clean, but it just ruined it. The filter works best when rinsed with plain cold water. Soap leaves residue that clogs it up, and after that, the vacuum doesn’t suck as well.

Always Let the Filter Dry Fully

One time, I was in a hurry and put the filter back while it was still wet. Big mistake. It caused a weird smell and even made the vacuum lose suction. The filter needs at least a full day to dry before putting it back.

Clear Hair from the Brush Bar Regularly

I used to skip this step because it seemed like a hassle, but hair and threads wrapped around the brush bar slow everything down. Now, I cut away tangled hair every week to keep the brush spinning freely.

Don’t Forget to Clean the Dustbin and Cyclone Vents

Emptying the bin is obvious, but dust can stick inside the cyclone vents and block airflow. I take a soft brush and gently clean those parts every couple of months. It really helps keep the vacuum running strong.

Avoid Over-Cleaning

Trying to clean every day or scrubbing hard actually wears down the vacuum parts. Keeping a steady, gentle cleaning schedule works better. It’s all about balance.

After making these mistakes, I figured out the right way to clean. Following these simple tips keeps my Dyson V10 working great. Learning how to clean Dyson vacuum cleaner V10 well is about knowing what to do—and what not to do.

Tips for Maintaining Your Dyson Vacuum Cleaner V10 for Long-Term Use

I’ve found that keeping a Dyson V10 running well isn’t just about cleaning it once in a while. It takes a bit of regular care, but it’s nothing complicated. When you know how to clean Dyson vacuum cleaner V10 the right way and take care of it, the vacuum lasts much longer.

Put It Away Carefully

After I’m done cleaning, I always make sure to place my Dyson V10 somewhere safe or back on its charger.

It’s easy to accidentally knock it over if it’s left lying around. Keeping it stored properly helps avoid damage and keeps the battery in good shape.

Look for Clogs Often

Dust and small bits can get stuck in the wand or attachments without you noticing. I try to peek inside regularly because even a small clog can make the vacuum feel weak. Catching these early saves a lot of trouble.

Swap Out Parts When Needed

Filters and brush bars don’t last forever. When my vacuum starts feeling less powerful or the brush isn’t spinning well, I know it’s time to replace those parts.

Doing that keeps the machine running smoothly without bigger problems later.

Don’t Keep It Plugged in All the Time

I used to think leaving it charging all the time was good, but it turns out that’s not the best for the battery. Now I charge it fully, then unplug until I need it again. It’s a small change that makes the battery last longer.

Use the Right Tools for Each Surface

Different floors need different attachments. For example, I use the soft roller on hardwood and the motorized brush on carpets. Using the right one stops the vacuum from working too hard and wearing out too fast.

Taking these simple steps has really kept my Dyson V10 working like new for a long time. Learning how to clean Dyson vacuum cleaner V10 is important, but pairing that with good care habits makes all the difference.

Conclusion

Taking care of your Dyson Vacuum Cleaner V10 isn’t tricky, but it does take some attention every now and then. From emptying the dustbin to giving the filter a good rinse, these small things add up.

I’ve found that when you don’t let dirt build up or ignore little problems, the vacuum just works better and lasts longer.

It’s also about simple habits, like storing it carefully and checking for blockages. Over time, swapping out parts when they wear down makes a big difference too.

If you keep up with these easy steps, your Dyson V10 will stay reliable and powerful. Knowing how to clean Dyson vacuum cleaner V10 the right way really helps you get the most out of your vacuum.

FAQs

How often should I clean the filter on my Dyson Vacuum Cleaner V10?

I usually clean the filter once a month. It keeps the vacuum running strong and stops dust from building up inside.

Can I wash the filter with soap or detergent?

No, I just rinse mine with cold water. Using soap can mess up the filter and make it less effective.

How long should the filter dry before putting it back?

I let it dry for a full day, about 24 hours, to make sure there’s no moisture left. Putting it back wet could cause problems later.